Thermoplastic Wire
An annealed solid or stranded copper conductor coated with Lead-Free PVC (Polyvinyl Chloride). It can be used in both dry and wet location not exceeding the conductor temperature of 60oC and a circuit voltage of up to 600 volts. It also has a heat, oil, and flame retardant properties generally used for residential, commercial, and industrial wiring circuits as well as for machines, air-conditioners, and other household appliances.
Solid
TW 600v 60°C Solid 1.6mm to 3.2mm
Stranded
TW 600v 60°C stranded 2.0mm² to 100mm²
Stranded
TW 600v 60°C stranded 125mm² to 500mm²
Moisture & Heat Resistant
Thermoplastic Wire
An annealed solid or stranded cooper conductor coated with Lead-Free PVC (Polyvinyl Chloride). It can be used in both dry and wet location not exceeding the conductor temperature of 75oC and a circuit voltage of up to 600 volts. It also has oil and flame retardant properties often used in general purpose outdoor grounding, such as CATV installations, swimming pool pumps, outdoor lighting fixtures, telephone and communications equipment, and traffic light signals.
Solid
THW 600v 75°C Solid 1.6mm to 3.2mm
Stranded
THW 600v 75°C stranded 2.0mm² to 100mm²
Stranded
THW 600v 75°C stranded 125mm² to 500mm²
Heat Resistant
Thermoplastic Wire with Nylon Overcoat
An annealed solid or stranded cooper conductor coated with Lead-Free PVC (Polyvinyl Chloride) and jacketed with tough Polyamide (Nylon). It can be used in both dry and wet location not exceeding the conductor temperature of 90oC and 75oC respectively and with a circuit voltage of up to 600 volts. The nylon jacket offers a higher resistance to oil and petroleum by products. it also offers a smooth finish for easier conduit installation and application.It is also applicable for building wiring, feeder, branch circuits, and internal secondary industrial distribution.
Solid
THHN 600v 90°C Solid 1.6mm to 3.2mm
Stranded
THHN 600v 90°C stranded 2.0mm² to 100mm²
Stranded
THHN 600v 90°C stranded 125mm² to 500mm²
Thermoplastic
Fixture PVC Insulated
Thermoplastic Fixture PVC Insulated Wire (TF Wire) is suitable used for type of services where its conductor temperature does not exceed 60oC in both dry and wet location. The copper conductors are available in both solid and stranded. Furthermore, TF Wires are manufactured in either a single conductor standard or a twisted pair. They are mainlyapplied in machine tool, lighting fixtures where the wire will beprotected from bending, appliance, and branch circuit control wiring. TF Wires are also heat, moisture, oil and gasoline resistant.
Solid
TF Wire Solid 0.65mm to 1.29mm
Stranded
TW 600v 60°C stranded 125mm² to 500mm²
Solid Twisted
TF wire solid (twisted) 0.65mm x 2C to 1.29mm x 2C
Stranded Twisted
TF wire stranded (twisted) 0.32mm2 x 2C to 1.25mm2 x 2C
Bare Copper
Wire
Bare Copper is a solid or stranded conductor that is mostly used for direct embedding installations. It is suitably used for ground wire, distribution lines, and transmission cables. For jumper and uninsulated hook up installations, stranded bare copper conductor are often prefer due to its higher flexible properties.
Solid
BC solid 1.6mm to 3.2mm
Stranded
BC STRANDED 2.0mm2 to 100mm2
Stranded
BC Stranded 2.0mm² to 100mm²
Other Products
Flexible Cord PVC Insulated
Flat Cord 0.32mm²/2C to 2.0mm²/2C
Flat / Flexible Cord may also be known as “continuous-flex” cables; these kinds of electrical wire are commonly used in portable moving appliances as it can easily cope with tight bending radii and physical stress. Furthermore, it is also very much popularly seen in extension cords and temporary power for events and exhibits.
Non-metallic ormex NM Wire 600V
NM solid 1.6mm / 2C to 2.6mm / 2C
Non Mettalic Sheathed Cable (NM Wire) is a type of covered electrical wire consisting of two insulated conductors qnd with a circuit voltage of up to 600 volts. NM wire is generally used for exposed and concealed installation, but not excessively expose to moisture and dampness. It is a basic interior electrical wire used to deliver power from the breaker to the lights, outlets and appliances.
TJW Jacketed Telephone Wire
TJW 0.65mm 3C/4C
Telephone Jacketed Wire is a low-frequency balanced cable used of connect and extend household telephone equipment specifically intercom and other indoor and outdoor communication equipment. A Telephone Jacketed cable comprises several numbers of insulated copper conductors having a diameter of 0.65 mm that are grouped into three (three-pair stranding) or four (four-pair stranding).
Portable Cord SJT Royal Cord
RC 0.75mm / 2C to 4C to 3.50mm / 2C to 4C
A hard usage service cord known for its durability, consisting of multiple conductor specifically a two, three and four conductor power cable usually applied in residential, commercial and industrial settings, as it is resistant to oil, chemicals, highly abrasive environment, water-resistant and water-submersible.
Automotive Wire
High temperature 105oC 0.75mm² to 8.0mm²
Automotive Wire is made of soft drawn bunched copper conductors insulated with Polyvinyl Chloride (PVC), which has a maximum conductor temperature of 105OC and a maximum voltage rate of 50 Volts. It is used in to connect automotive electrical circuits and accessories such as automotive relays, fuse blocks,clearance lights and switch panels.